EATON 3P ELLIPSE 1700 USB DIN/.
Opis produktu
Specyfikacja
- Surge protection: Yes
- Noise level: 25 dB
- UPS topology: Standby (Offline)
- Output power capacity: 1.7 kVA
- Input frequency: 46/70 Hz
- Output power: 1040 W
- Input operation voltage (max): 284 V
- Input operation voltage (min): 161 V
- Output operation voltage (max): 284 V
- Output operation voltage (min): 161 V
- Output frequency: 50/60 Hz
- Efficiency: 97 %
- Waveform: Stepwise
- Number of input phases: 1
- Number of output phases: 1
- Output power factor: 0.6
- Auto shut-off: Yes
- Efficiency (ECO mode): 97 %
- Power consumption (average operating): 32.2 W
- AC outlet types: C13 coupler
- AC outlets quantity: 8 AC outlet(s)
- Ethernet LAN (RJ-45) ports: 1
- USB port: Yes
- USB 2.0 ports quantity: 2
- Battery voltage: 12 V
- Battery capacity: 9 Ah
- Number of batteries supported: 2
- Product colour: Black
- Certification: IEC/EN 62040-1 IEC/EN 62040-2 IEC/EN 62040-3 CE UKCA Ukr Cm
- Form factor: Tower
- Display type: LED
- Control type: Buttons
- Operating temperature (T-T): 0 - 40 °C
- Compliance certificates: CB,CE,RoHS,WEEE
- Waste Electrical and Electronic Equipment (WEEE) compliance: Yes
- Weight: 7800 g
- Width: 81 mm
- Depth: 312 mm
- Height: 305 mm
- Package type: Box
- Cables included: USB cable
- Quick installation guide: Yes
- Input connection type: C14
- Nominal input voltage: 220-240 V
- Relative humidity: 0 - 95 %
Szczegóły produktu
- Marka Eaton
- Kod produktu 6826081c3cc164a5e669ed54
- Dostępność 5 Przedmioty
- EAN13 3553340621437
- MPN 3P1700UD
Specyfikacja
- Montaż Rack Nie
- Moc czynna UPS (W) 1040 W
- Czas podtrzymania i obciążenie 1.25 min przy obciążeniu 100%
- Moc pozorna UPS (VA) 1700 VA
Producent
Producent
Eaton Corporation plc
Eaton House, 30 Pembroke Road D04 Y0C2 Dublin Ireland
Formularz kontaktowy: https://www.eaton.com/us/en-us/company/contact-us.html
Telefon: +353 (0) 1637 2877
Bezpieczeństwo
Informacje o bezpieczeństwie
List of UPS safety warnings based on the requirements of Regulation (EU) 2023/988 on General Product Safety (GPSR) 1. Risk of electric shock: * Make sure the UPS is plugged into an outlet with grounding to avoid shock. * Do not touch the UPS or cables with wet hands to avoid electric shock. * Do not use UPS in areas with high humidity, e.g. in the bathrooms. 2. Risk of overload: * Do not connect more devices to the UPS than its specification allows to avoid overloading and damage. * Check that the devices connected to the UPS do not exceed its maximum power. 3. Risk of overheating and fire: * Do not block ventilation openings in the UPS to ensure adequate air circulation. * Do not place the UPS near heat sources or in enclosed spaces where overheating may occur. * Use only the original cables and accessories provided by the manufacturer to avoid the risk of fire. * In case of UPS failure or overheating, disconnect it from power immediately. 4. Risk of battery damage: * Do not expose the UPS battery to high temperatures, humidity or direct sunlight. * Do not attempt to open, damage or short-circuit the UPS battery. * Replace batteries only with models recommended by the manufacturer and according to the instructions. * Recycle used batteries in accordance with local regulations. 5. Environmental hazards: * Do not use UPS in environments with high dustiness or exposure to chemicals. * Protect your UPS from flooding and moisture. 6. During cleaning: * Before cleaning, disconnect the UPS from the power supply and use a dry, soft cloth. * Do not use aggressive cleaners or solvents. 7. Transportation and storage: * Transport your UPS in its original packaging or properly secured to avoid damage. * Store your UPS in a dry and cool place, away from heat and moisture sources. 8. Children and pets: * Keep the UPS and its cables away from children and pets to avoid accidental damage or electric shock. 9. Additional warnings: * If you notice smoke, unusual smell or sound coming out of the UPS, disconnect it from the power supply immediately. * Regularly check the status of your UPS and its cables to detect any damage. * In case of long-term power outage, disconnect non-critical devices from the UPS to save battery power. * Follow the UPS manual provided by the manufacturer. 10. Disposal: * Dispose of used UPS to an e-waste collection point to ensure it is properly recycled and avoid negative environmental impacts.
Zasilacze awaryjne UPS
Ostatnio oglądane
Produkty, które ostatnio zwróciły Twoją uwagę.